Installation Guide
Quick-start setup for your construction camera
Thanks for choosing Evercam. Below you’ll find setup guides for the Evercam camera systems across wall, pole, rooftop NPR, trailer, and solar-powered configurations. These step-by-step guides are designed for field teams and contractors. Each one includes the tools you’ll need, key instructions, and how to get your camera online fast.
Powered Unit Non-Penetrating Roof Mount (NPR) Installation
Set up your wall, pole, or roof-mounted (NPR) Milesight camera using a standard power source. This guide walks you through camera mounting, powering up, and going live.
Powered Unit Wall Installation
Set up your wall, pole, or roof-mounted (NPR) Milesight camera using a standard power source. This guide walks you through camera mounting, powering up, and going live.
Solar Unit Pole Installation
Designed for off-grid sites, this guide covers everything from solar panel mounting to BBA-6 enclosure setup and commissioning your system with Victron.
Solar Unit Roof-top Installation
Designed for off-grid sites, this guide covers everything from solar panel mounting to BBA-6 enclosure setup and commissioning your system with Victron.
Camera Mounting
Wall or pole? This guide shows you how to mount your Milesight camera securely, connect cables, and adjust your field of view.
Maintenance & Troubleshooting
For ongoing support, this guide includes factory resets, router swaps, hard drive replacements, and using the Victron app to troubleshoot power issues.
Gate Report / ANPR Installation
Install your Gate Report or ANPR system with clear instructions on mast assembly, camera placement, and powering.
Mobile Trailer Setup
Get your mobile trailer camera up and running fast. This guide covers parking, mast operation, power-up steps, and battery charging.